Product Overview
Brand: RLMVGBX
Features:
- SDS‑to‑Hex Conversion: These adapters let you use standard 6.35mm (1/4 inch) hex shank drill bits and screwdriver bits in an SDS hammer drill. A practical way to expand the range of bits your drill can handle without buying dedicated SDS accessories.
- Solid Steel Construction: Machined from steel with a smooth, burr‑free finish. The adapters hold their shape under torque and resist deformation, keeping the bit seated securely during repetitive drilling and driving tasks.
- Standard SDS Shank: The SDS end fits all common SDS and SDS‑Plus chucks. Simply push and lock into place – no chuck key or tightening collar required. The hex end accepts any standard 6.35mm bit with a positive click.
- Compact and Lightweight: Each adapter measures 60 mm long and 15 mm diameter, weighing just 10 g. They take up almost no room in a tool bag or pocket, and swapping between bits takes seconds.
- Two Adapters Included: The pack supplies two identical adapters, so you can keep one loaded with a drill bit and the other with a driver bit, or have a spare ready when the first is in use. Suitable for woodworking, metal fabrication, furniture assembly and general repairs.
Details: The RLMVGBX 2‑Pack SDS Bit Adapters convert an SDS hammer drill chuck to accept standard 6.35 mm hex shank drill bits, screwdriver bits and socket drivers. Each adapter is turned from steel and built to transfer rotary force efficiently from the drill to the bit. What’s Included 2 × SDS hex bit adapters Material: Steel Overall length: 60 mm Shank diameter: 15 mm (SDS end) Hex socket: 6.35 mm (1/4 inch) Total pack weight: 20 g Compatibility Drills: Fits SDS and SDS‑Plus chucks found on most corded and cordless hammer drills. Bits: Accepts any standard 1/4‑inch hex shank insert bits, power bits and hex‑shank drill bits up to the adapter’s socket depth. Also works with hex‑shank socket drivers. How to Use Retract the SDS chuck collar and insert the adapter’s SDS end. Release the collar and tug gently to confirm it is locked. Push a hex shank bit into the opposite end until it clicks into place. Set the drill to rotation‑only mode (or hammer‑and‑rotation for masonry bits) and begin. To remove the bit, pull the chuck collar back and slide the adapter out. Important Usage Notes These adapters are designed for rotary drilling and driving. Do not use in hammer‑only (chisel) mode – this can damage the adapter and chuck. The adapter adds length to the bit; measure clearance in confined spaces before drilling. For heavy‑duty hammer drilling into concrete, use dedicated SDS masonry bits for best performance and bit life. Care and Storage Wipe the adapter clean after use and apply a light oil to prevent surface rust. Store in a dry toolbox or case. Inspect the hex socket periodically; if it becomes worn or the bit no longer holds securely, replace the adapter. Frequently Asked Questions Will this fit my SDS‑Plus drill? Yes, the SDS shank is compatible with both SDS and SDS‑Plus chucks. Can I use impact driver bits? Yes, standard 1/4‑inch hex bits click straight in. For best results with long screws, use bits rated for impact use. Does it work with hammer mode? The adapter can be used in rotary‑hammer mode when drilling masonry, but hammer‑only (chisel) mode is not suitable and may damage the adapter. Why does my bit wobble? Ensure the bit is fully seated in the hex socket. A slight play is normal; if movement is excessive, the adapter may be worn and should be replaced. Can I use hole saws with this? Only if the hole saw has a 1/4‑inch hex shank. For larger hole saws, a dedicated SDS hole saw arbor is recommended.
