Product Overview
Brand: ATIE
Features:
- For above ground liner or inflatable pools with Water Leak
- Repair small pinholes and tears on vinyl liner pools and Inflatable pools and floats, toys, and lounges
- Also for inflatable pool floats, toys, and lounges with Air Leak
- Kit Included: 2Packs of 1 oz tube adhesive, 2 sheets of 3.5" x 7" clear vinyl patch, and an applicator
- WORK UNDER WATER -- wet or dry application for any vinyl liner repairs. Heavy Duty!
Details: It is for vinyl liner pool and inflatable above ground pool. It can be used for vinyl floats, rafts, toys, and tubes. For deep underwater repairs, cut round corners on patch. Apply adhesive to patch and fold patch over upon itself. When you reach the damaged area under water unfold patch and apply immediately to liner, squeezing out all water bubbles. Do not disturb patch for at least 24 hours. Allow 24 hours for full cure. *** Application Instructions Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling. Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength. Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.
