Product Overview
Brand: YCKJDYR
Color: Silver+yellow
Features:
- SIX 40 MM DIAMOND-GRIT WHEELS FOR 1.5"–8" PIPE – This inside pipe cutter ships with six 40 mm steel diamond-grit wheels, so you can cut plastic pipe from 1.5 to 8 inches in repair, replacement, and installation work. Spare wheels are available — replacement wheels when the grit wears down, so the tool keeps working instead of becoming disposable.
- ADJUSTABLE 7-INCH DEPTH GUIDE WITH STEEL SHAFT – The scale-marked steel shaft and adjustable guide disc let you cut up to 7 inches inside a pipe. To set it: slide the guide disc to your target depth, tighten the locking screw to hold it, then cut for consistent flush cuts. The steel shaft resists bending under normal drilling torque — avoid over-tightening or excessive side force.
- 1/4-INCH HEX SHANK FOR DRILLS & IMPACT DRIVERS – Fits compatible drills and impact drivers with a 1/4-inch hex chuck. The included stabilizing handle gives a second grip point to keep the cutter aligned. Note: this tool cuts pipe from the inside — it needs enough clearance to insert the cutter, and it is not designed for pipe already glued into a fitting where the wheel cannot reach the cut line.
- CUT FROM INSIDE IN TIGHT SPACES – Trim pipe from the inside without removing surrounding walls, floors, or concrete when outside access is limited — ideal for stub-outs, drains, repairs, and plumbing retrofits. Recommended PPE: wear safety glasses and gloves, and run the drill at a controlled speed with steady feed for a clean, controlled cut.
- FOR PVC, ABS, PPR, PE, AND PEX PIPE – Designed for common plastic plumbing materials including PVC, ABS, PPR, PE, and PEX. For softer plastics like PPR, PE, and PEX, use a lower drill speed and slow, steady feed to reduce heat and avoid cracking. After cutting, deburr the pipe end with a deburring tool or sandpaper before joining. Insert the cutter, set the depth guide, and run the drill in forward rotation.
