Product Overview
Brand: Bandeiman
Color: Black
Features:
- 【Accurate matching】 This car roof moulding trim seal kit is suitable Compatible with Toyota Tundra CrewMax Cab （November 2006 to October 2021） models（part number 75552-0C060/75551-0C0060） ATTENTION: Not Fit For Double Cab（Please confirm your vehicle model before purchasing to ensure it is suitable for your vehicle)
- 【Strengthen waterproof sealing】 Made of high-quality rubber it is resistant to aging and has long-lasting elasticity, effectively preventing rainwater from seeping into the A-pillar and interior of the roof, and protecting the metal structure of the car from rusting for a long time.Compared with general sealing strips, our sealing strips have thin steel wires embedded inside to ensure their stability.
- 【Optimization of water diversion efficiency】The unique groove design quickly diverts rainwater, avoiding corrosion of the roof weld caused by water accumulation, especially suitable for rainy areas or off-road use scenarios
- 【UV resistance and weather resistance】Through standard UV testing, it does not deform or crack under extreme temperatures of -40 ℃~60 ℃, and is suitable for snowy/desert climates in North America
- 【Mute and reduce wind noise】 The integrated molding structure reduces wind cutting noise during high-speed driving, and the noise reduction effect is improved by more than 30% compared to auxiliary components
Details: 2Pcs Roof Drip Molding Weatherstrip Compatible with 2007-2021 Toyota Tundra CrewMax Cab Left & Right Side Roof Trim with Embedded Steel Wire Seals ， Replace 75552-0C060 75551-0C060(Not Fit Double Cab) Core features Material engineering Main body is rubber, density reaches 1.35g/cm³, passed -40℃~60℃ extreme temperature cycle test Surface laser etched guide pattern, drainage efficiency reaches 4.8L/min (actually measured in heavy rain conditions) Adaptability design Stepped bite structure is adopted at the joint of A-pillar with CrewMax model (geometric difference with Double Cab version reaches 12.7mm) Peel strength ≥44N/cm, adapted to original paint and metal trough Protective performance The edge of integrated water retaining lip extends 8mm, effectively blocking water from penetrating into the door hinge area UV stabilizer added ratio is 5.2%, delaying the aging rate to an average annual thickness loss of 0.03mm Installation points Original residual glue needs to be completely removed When positioning, ensure that the guide groove arrow mark faces the direction of vehicle forward movement After installation, it needs to stand for 48 hours to allow the tape to fully cure (ambient temperature＞15℃) Note: This component is compatible with Double Cab versions have structural differences. Improper installation will result in increased wind noise and drainage failure.
